Janome Pro4DX Serger
Link to Main Toews
Pro4 Home Page
If you’re looking for a machine with productivity and professional results, the Pro4DX is unrivaled. With 2 needles, 2, 3 or, 4 thread overlock stitching, color-coded thread guides, and a self-threading lower looper, the threading process becomes painless. This impressive machine also allows users to quickly switch to rolled hemming without having to change the needle plate.
The Janome Pro4DX is an exceptional serger, and can do a 2, 3 or 4 thread overlock stitch. You can adjust the differential feed ratio from .05 to 2.25 which gives you more control for different fabrics and effects.
Color-coded thread guides and a self-threading lower looper make threading a breeze. Just put your thread into the guide, use the switch and it will thread the lower looper.
Turning the balance wheel will return the guide to its normal position automatically. Thread tensions will automatically be released when you lift the presser foot for rethreading.
With the Pro4DX, you can quickly change to a rolled hem without changing the needle plate. The lower looper has a pre-tension stitch that saves you timewhen doing a rolled hem as you no longer need to change the tension.
Ensure you always get a professional result by using the Pro4DX for all your serging needs.
Features
This Janome serger has exceptional features. These are:
- 2 needles
- 2, 3 or 4 thread overlock stitching
- Differential feed ratio from .05 to 2.25
- Rolled hemming capabilities
- Lower looper pre-tension stitch
- Self-threading lower looper
- Color-coded thread guides
Standard Accessories
This serger comes with:
- Needles
- Needle threader
- Standard needle plate
- Standard serger foot
- Thread stripping discs
- 4 spool nets
- 4 spool caps
- 4 spool holders
- Waste chip box
- Upper knife
- Tweezers
- Spreader
- Lint brush
- Screwdriver (L, S)
- Spanner
- Oil
- Downloads