February 27th, 2018: Top Maintenance Hacks for Your Janome Skyline S9

February 27th, 2018

The Janome Skyline S9 is an impressive piece of technology, combining the best features of sewing and embroidery machines. To maintain its peak performance and longevity, it’s essential to adhere to a regular maintenance routine. This essay will provide you with some top maintenance hacks that will help ensure that your Skyline S9 remains in optimal condition for many years to come.

Regular Cleaning

One of the simplest yet most important maintenance hacks for the Skyline S9 is regular cleaning. Dust, fabric lint, and thread debris can build up over time and interfere with your machine’s functioning. Make it a habit to clean the bobbin area after each project, using a small brush to remove dust and lint gently. Avoid using canned air, as this can push debris further into the machine.

Lubrication

The Janome Skyline S9, like any mechanical device, benefits from regular lubrication to ensure smooth operation. While some modern machines are self-lubricating, the S9 requires periodic oiling, particularly around the bobbin area. Use only “sewing machine oil”, as it’s specifically designed for this purpose. Put one drop in the hole underneath the bobbin roughly every 8 hours of sewing time on the machine .Remember to run a scrap piece of fabric through the machine after oiling to catch any excess oil before starting on a project.

Needle Replacement

The condition of the needle can significantly affect the performance of your Skyline S9. As a rule of thumb, needles should be replaced after every 8-10 hours of continuous sewing, or at the completion of a project. Using a dull or damaged needle can result in skipped stitches, thread breakage, or even damage to your fabric. The correct needle for the fabric is important as well. For example, if not using a ball point needle for jersey fabric, it could cause a major jam and potentially cause damage.

Using the Right Bobbin

It might be tempting to use any bobbin that fits, but for the best performance, it’s important to use the bobbins recommended by Janome for the Skyline S9.

Using the wrong bobbin can affect stitch quality and potentially damage your machine.

Use Quality Thread

Using high-quality thread can help maintain your Skyline S9’s performance. Poor quality thread tends to create more lint, which can clog the machine’s tension disks and bobbin area. Additionally, low-quality thread can lead to thread breakage and uneven stitches, reducing the overall quality of your sewing.

Regular Professional Service

While regular cleaning and basic maintenance can be done at home, it’s a good idea to have your Skyline S9 professionally serviced at least once a year, especially if you use the embroidery mode a lot. A professional technician will thoroughly clean and oil areas you can’t reach, adjust the timing, and identify any potential issues before they become problematic.

Attend to Issues Immediately

If you notice something unusual with your machine – a strange noise, the machine running hot or just not working properly- it’s crucial to address these issues immediately. Ignoring these warning signs can lead to more severe problems down the line. Consult your user manual and reach out to Janome’s customer service for assistance.

Periodic Updates

Just like your smart phone or computer, your Skyline S9 benefits from periodic software updates. Janome regularly releases updates that improve machine performance and occasionally add new features. Make it a practice to check for updates regularly. This will keep your Skyline S9 up-to-date and functioning at its best.

Keep the Machine Covered and Properly Stored

If your machine will be unused for a lengthy period, proper storage is key. Store it in a cool, dry place to prevent any potential damage from moisture. Additionally, make sure to clean and oil your machine thoroughly before storing it. When not in use, it’s advisable to keep your Skyline S9 covered. This can protect it from dust

accumulation and potential damage from other items. The Skyline S9 often comes with a semi-hard dust cover, which is designed to perfectly fit and protect the machine.

Conclusion

In conclusion, maintaining your Janome Skyline S9 is not a daunting task. With these simple maintenance hacks, you can ensure that your machine continues to function efficiently and lasts for years. Remember, a well-maintained machine not only performs better but also allows for a smoother, more enjoyable sewing and embroidery experience. With the right care, this remarkable machine can continue to be a source of creativity and productivity for many years. These maintenance hacks, combined with the advanced features of the Skyline S9, will ensure that you can focus on what truly matters – creating beautiful and intricate sewing and embroidery projects.

EXCEPTIONAL CUSTOMER SUPPORT: Janome prides itself on providing excellent customer support, 
Additionally, the machine comes with a 25-year limited warranty, ensuring the user’s peace of mind.

Toews Sewing Janome S9 Home Page